Télécharger Imprimer la page

Mectron compact piezo LED Mode D'emploi Et D'entretien page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 169
1.3
Disclaimer
The manufacturer MECTRON disclaims all lia-
bility, express or implied, and cannot be held
responsible for direct or indirect personal inju-
ry and/or property damage, occurring as a re-
sult of incorrect procedures linked to the use
of the appliance and its accessories.
The manufacturer MECTRON cannot be held
liable, expressly or implicitly, for any type of
personal injury and/or property damage, in-
flicted by the user of the product and its ac-
cessories and which occurs in the following
cases, by way of example and not of limitation:
• Misuse or use during procedures other
than those specified in the destination of
use of the product;
• The environmental conditions for
preservation and storage of the device
are not complying with the requirements
indicated in
Chapter 9 on page 35
• The appliance is not used in
accordance with all the instructions and
requirements described in this manual;
• The electrical system of the places where
the equipment is used do not comply
with the laws in force and the related
regulations;
• Assembly operations, extensions, re-
adjustments, upgrades and repairs of the
device are carried out by personnel not
authorised by MECTRON;
• Misuse, abuse, abnormal use, negligent
use, intentional misconduct or use
exceeding the limits of the appliance
indicated and allowed and/or normal
wear or deterioration, ill-treatment and/
or incorrect interventions;
• Any attempt to tamper with or
modification of the appliance under
every circumstance;
• Use of non original MECTRON inserts
resulting in permanent damage to the
thread of the handpiece with impaired
functioning and risk of injury to the
patient;
• Use of non original MECTRON inserts
used in accordance with the settings
designed and tested on the original
MECTRON inserts. Correct use of the
settings is only guaranteed with original
MECTRON inserts;
• Shortage of stock material (handpiece,
;
inserts, wrenches) to be used in case of a
standstill due to faults or problems;
• Incorrect/omitted maintenance
compared to what is stated in
on page 34
• Breach of the requirements and the
information contained in
page 16
• Breach of the requirements and the
information contained in
page 19
• Unauthorised repairs in accordance with
the indications contained in
on page 45
INTRODUCTION
Chapter 7
of this manual;
Chapter 4.5 on
of this manual;
Chapter 6 on
of this manual;
Chapter 10.2
this manual.
3

Publicité

loading