Mectron compact piezo LED Mode D'emploi Et D'entretien page 42

COMPACT PIEZO LED
WARNING: On completion of the
sterilisation cycle in autoclave, the scaler
handpiece remains at the sterilisation
temperature for a long time. Use appropriate
precautions when extracting the scaler
handpiece from the autoclave to prevent
injury to the operator.
6.4.2.1 Special Information
Sterilisation parameters, in steam autoclave, used in Great Britain:
• Temperature: 134° C;
7 ROUTINE MAINTENANCE
1. Always turn the appliance off before
performing maintenance works;
2. Periodically check the cord of the
scaler handpiece. If the material is
8 METHODS AND PRECAUTIONS FOR
DISPOSAL
WARNING: Hospital waste. Treat the
following objects as hospital waste:
• Inserts, when worn or broken;
• Inserts tightening wrench, when worn or
broken.
Disposable materials and materials that carry
biological risk must be disposed of according
to local regulations in force regarding
hospital waste.
WARNING: When handling the inserts,
pay particular attention to the sharp, pointed,
irregular parts to avoid any wounds or
injuries.
34
CAUTION: Wait for the scaler handpiece
to cool down completely before use.
• Time: 3 minutes.
damaged or deteriorated, contact the
manufacturer of the dental unit to have
it replaced
COMPACT PIEZO LED must be disposed of
and treated as waste subject to separate col-
lection.
Failure to comply with the previous points can
result in a penalty pursuant to the directive
on waste electrical and electronic equipment
(WEEE).
The purchaser is entitled to deliver the device
to be disposed of to the dealer who supplies
them with new equipment; at Mectron, in-
structions for proper disposal are available.