Mectron compact piezo LED Mode D'emploi Et D'entretien page 54

COMPACT PIEZO LED
11 WARRANTY
All Mectron devices, before being marketed,
are subjected to a careful final inspection that
verifies their full functionality.
Mectron provides
COMPACT PIEZO LED, purchased new from a
Mectron dealer or importer, which covers de-
fects in material and workmanship for a period
of:
• 2 (TWO) YeArS for the appliance from
the date of purchase;
• 1 (ONe) YeAr for the handpiece from
the date of purchase.
The other accessories are not covered by the
warranty.
During the warranty period, Mectron under-
takes to repair (or, at its discretion, to replace)
the parts of products free of charge, which,
according to its judgement, are proven to be
defective.
Full replacement of Mectron products is not
covered by the warranty.
The manufacturer's warranty and the approval
of the appliance are not valid in the following
cases:
• The appliance is not used in accordance
with the intended use.
• The appliance is not used in
accordance with all the instructions and
requirements described in this manual.
• The electrical system of the places where
the appliance is used does not comply
with the laws in force and relative
requirements.
• Assembly operations, extensions,
adjustments, updates and repairs are
carried out by personnel not authorised
by Mectron.
• The environmental conditions for
preservation and storage of the device
do not comply with the requirements
indicated in Chapter 6 on page 19
46
a warranty for
.
• Use of non-original Mectron inserts,
accessories, and spare parts that may
compromise the correct operation of
the appliance and cause injury to the
patient.
• Accidental breakage during transport.
• Damage due to incorrect use or
carelessness, or due to connection to a
voltage other than that envisaged.
• Expired warranty.
The expected service life of the device is min-
imum 5 years.
The service life / duration does not establish a
limit of use; the service life of the device de-
fines the period of time after installation and/
or commissioning, during which the original
performance, or in any case performance suit-
ed to the intended use, is guaranteed without
there being any degradation such as to com-
promise functionality and reliability.
The service life is a minimum qualitative ob-
jective of the design, therefore, individual
parts or components may guarantee superi-
or performance and reliability with respect to
that declared by the manufacturer.
The service life assumes compliance with the
maintenance schedules set out in this manual,
does not include components normally sub-
ject to "wear", and is not linked to the warranty
period: the service life does not establish any
implicit or explicit extension of the warranty
period.