Mondolfo Ferro MT 3600 up Manuel D'utilisation page 87

- Change the displayed width value by increasing or decreasing the value using the
keypad.
After updating the wheel data the user can:
1) press the Exit
ing to the new dimensions;
2) press the ENTER button to access the manual dimension program to convert and/or
change the wheel data.
- if two subsequent measurements are taken inside the rim on two balancing planes, the
machine interprets the presence of a rim with balancing using a clip weight on the in-
ner plane and an adhesive weight on the external one (EASY ALU2). In this phase, the
machine could automatically change the type of weight on the inner plane from clip to
adhesive (EASY ALU1).
EASY ALU 2
Returning the arm to the rest position makes it possible for the operator to change this
setting by selecting and using the Enter button to press the icon.
case, the balancing programme switches from EASY ALU1 to EASY ALU2 and vice versa.
Operator's manual MT 3600 - MT 3600 C Up
button to display the unbalance values recalculated accord-
13
EASY ALU 1
If this is the
87