Mondolfo Ferro MT 3600 up Manuel D'utilisation page 105

and the next one, the OPT procedure always remains stored. Therefore, going back to
the start environment, the programme resumes the execution from the point where it
was interrupted. This situation is possible when the Temporary Exit icon is selected.
EASY WEIGHT is a suite containing 4 programmes:
1. Hidden Weight
2. Split Weight
3. OPT flash
4. Minimum Weight.
Note: the Hidden Weight, Split Weight and OPT Flash programmes are available even
when EASY WEIGHT is not enabled.
To access this suite you must:
• select the Utility programmes icon;
• select the EASY WEIGHT icon .
In this way you will access the main screen of EASY WEIGHT, showing 4 icons:
the OPT Flash icon for the unbalance minimisation programme;
1.
2. the Balancing programme icon that unites all the available balancing programmes;
the Statistics icon that visualises the statistics relating to the use of the Minimum
3.
Weight programme;
4. the Minimum Weight icon for the slow or fast vehicles weight savings programmes.
If programme EASY ALU1 or EASY ALU2 has been set to "auto" mode, the Hidden weight
icon will also appear, while if the programme ALU MOTO has been set in "motorcycle"
mode, the Divide side weight icon will appear.
Note: for Balancing programmes refer to the BALANCING PROGRAMMES paragraph.
Note: for the OPT Flash programme, see the paragraph OPTIMISATION PROGRAMME
(OPT FLASH).
Weight savings programme (Minimum Weight)
This programme allows you to obtain the optimum balancing of the wheel, reducing the
quantity of weight to be applied to a minimum.
To access this programme you must:
select the Utility programmes icon;
•
• select the EASY WEIGHT icon.
In this way you will access the main screen of EASY WEIGHT, and the unbalance values
visualised will be automatically updated.
Selecting the Minimum Weight icon , it is possible to choose between 2 different weight
savings programmes:
• optimised programme for fast vehicle wheels;
• optimised programme for slow vehicle wheels.
The status bar of the displayed screen will show:
• the Fast wheel icon, if the programme for fast vehicle wheels has been selected;
the Slow wheel icon, if the programme for slow vehicle wheels has been selected.
•
Note: each time the machine is switched on, if the EASY WEIGHT suite has been acti-
vated, the Fast wheel programme is automatically set.
At this point it is possible to perform the wheel balancing, using the required balancing
Operator's manual MT 3600 - MT 3600 C Up
EASY WEIGHT SUITE
105