Mondolfo Ferro MT 3600 up Manuel D'utilisation page 112

- The following icons are displayed:
Set grams x1; displays the unbalance values gram by gram.
Set grams x 5; displays the unbalance values 5 grams by 5 grams.
If the unit of measure is ounces:
Set tenths of an ounce; displays the unbalance values in tenths of an ounce.
Set fourths of an ounce; displays the unbalance values in quarters of an ounce.
- Press the Enter button to select the icon desired .
- Press the Exit button to exit and save the setting.
Unbalance unit of measure (g/oz) configuration
Sets the unit of measure to grams or ounces.
After the list of the setting programmes is displayed, proceed as follows:
- Select the unbalance unit of measurement icon .
- The following icons are displayed:
g; displays the unbalance values in grams.
oz; displays the unbalance values in ounces.
- Press the Enter button to select the icon desired .
- Press the Exit button to save the setting and exit .
After selecting, the new setting is saved and the unbalance image is displayed again.
OPT warning configuration
Enables/disables the Optimisation programme warning at the end of the spin. After the
list of the setting programmes is displayed, proceed as follows:
- Select the Enable/disable OPT warning icon .
112 Operator's manual MT 3600 - MT 3600 C Up