Mondolfo Ferro MT 3600 up Manuel D'utilisation page 111

In the case in which the laser line is faulty, the balancing adhesive weight is possible to
apply it to 6 hours (Table A), while the spring always weight to 12 hours.
- On the screen appear the three icons that represent the possible positions as shown below:
The selected icon is enabled if it is presented in the following configuration:
TABLE A
Type Balancing Program
ALU3
ALU4
ALU5
STATIC
Sets the unbalance rounding-off to grams x1 or grams x5, or, if set to ounces, to oz x 1/4
or oz x 1/10, with which the unbalance values are displayed.
- Select the unbalance rounding-off
Operator's manual MT 3600 - MT 3600 C Up
Adhesive weight applica-
tion position Plan A
ALU1
ALU1P
ALU2
ALU2P
Unbalance rounding-off configuration
H6
or
LASER
H12
H6
or
LASER
H12
H6
or
LASER
H6/LASER
or
H12
icon.
Adhesive weight applica-
tion position Plan B
H6
or
LASER
H6
or
LASER
H12
H12
H12
111