Mondolfo Ferro MT 3600 up Manuel D'utilisation page 85

In machines where the adjustable drain A of figure 11h is also present on the rear side
of the body
it is possible to remove the wheel that may be present on the machine by proceeding
as follows:
- Close the adjustable drain A (fig. 11h);
- Blow compressed air on the fitting B in the figure 11h;
- restore the correct functioning of the wheel locking device by returning the adjusta-
ble outlet A in the above conditions to closing.
Operator's manual MT 3600 - MT 3600 C Up
11g
11h
85