Télécharger Imprimer la page

Medtronic Affinity CP AP40AST Mode D'emploi page 36

Publicité

calculated value is based on characteristic curves that are not
representative of the Affinity CP centrifugal blood pump and may result in
inaccurate readings.
• The device is not serviceable. Do not disassemble the device because the
performance of the device may be adversely affected. If the device has
been tampered with, do not use it.
4 Precautions
• This device should be used only by clinicians thoroughly trained in
extracorporeal circulation procedures.
• Inspect the adapter for physical damage before use. Do not use the
adapter if it appears to be damaged. Return the damaged product to a
Medtronic representative.
• The adapter contains magnets. Keep the adapter away from metals,
magnetic tapes, and magnets.
• Do not strike or drop the device. A shock may damage the device.
• Do not insert or remove the adapter or the pump until the drive motor has
completely stopped.
• To reduce the risk of the adapter and pump detaching from the drive motor
or any tubing connections, do not bump or strike the adapter or the circuit
components during use. If detachment occurs, refer to Chapter 8.
• Do not store at extremes of temperature and humidity. Avoid storing the
adapter in direct sunlight.
• For complete installation information, refer to the instructions for use
provided with the Stöckert and Sorin centrifugal pump systems or the
Sarns and Terumo centrifugal systems.
• Do not use alcohol-based solutions, other organic solvents, or
concentrated acids or bases on the adapter. The adapter may be
damaged by these solutions.
• Do not use the adapter after the Use-by date on the device label.
• Refer to the package labeling or instructions for use for storage
temperature requirements.
• Dispose of the device in accordance with applicable laws, regulations, and
hospital procedures, including those regarding biohazards, microbial
hazards, and infectious substances.
English
36

Publicité

loading