Step 2: Masimo Safetynet Alert System Setup; Home Medical Hub Setup - Masimo SafetyNet Alert Manuel De L'utilisateur

Step 2: Masimo SafetyNet Alert System Setup

After the Masimo SafetyNet Alert App is installed and setup, follow the app instructions to set up
your Masimo SafetyNet Alert System:
•
Pair the App to the Home Medical Hub.
• Connect the Home Medical Hub to the Wi-Fi.
•
Setup the Masimo Sensor and pair to the Home Medical Hub.
•
Add your Emergency Contacts.

Home Medical Hub Setup

Follow the instructions below to set up the Masimo SafetyNet Alert system. The Home Medical
Hub is set up in two (2) steps.
Step 1: Pair the Masimo SafetyNet Alert App to the Home Medical Hub using
Bluetooth.
Step 2: Connect the Home Medical Hub to the wireless network (Wi-Fi).
WARNING: Place the Home Medical Hub in a safe location so as not to fall on anyone and where
the alarm sounds can be heard.
1. Following the on-screen instructions, connect the Home Medical Hub to a power
outlet using the AC power cord and adapter and select Continue.
Note: The Home Medical Hub Status LED is white when powered on.
21