Masimo Sensor Setup - Masimo SafetyNet Alert Manuel De L'utilisateur

2. Hold your smart phone near the Home Medical Hub during setup. When complete,
the App screen will display: Success.
Note: If the Bluetooth connection fails, hold the smart phone closer to the Home
Medical Hub and try to reconnect. If the Home Medical Hub cannot connect, see
Troubleshooting
3. Next, connect to your Wi-Fi by selecting Set Up Wi-Fi and follow the app instructions.
Select the wireless Network and enter the Password. Select Continue.
4.
Note: To view available Wi-Fi networks within range of the Home Medical Hub, click
the Network field and select from the displayed list
5. Once the Wi-Fi connection is established, the Home Medical Hub Wi-Fi Setup
Successful screen will appear. If the Home Medical Hub cannot connect, follow the on-
screen instructions to verify the network and try again or view
page 39.
6. Next, you will need to attach the Masimo Sensor and connect it with the Home
Medical Hub. See

Masimo Sensor Setup

After the Home Medical Hub is set up, follow the on-screen instructions to:
•
Set up the Masimo Sensor.
• Attach the sensor to your hand.
• Pair the sensor to the Home Medical Hub.
•
Insert the Masimo Chip into the sensor.
Attaching the Masimo Sensor
Follow the instructions to attach the Masimo Sensor to your hand.
1. Gather all components required for monitoring. See
Chip Overview
on page 39.
Masimo Sensor Setup
on page 18.
22
Troubleshooting
on page 22 for additional instructions.
Masimo Sensor and Masimo
on