Safety - SICK PAC50 Notice D'instruction

Operating Instructions

2 Safety

WARNING!
Failure to observe the following safety notes and warnings may result in personal injury and
material damage.
2.1 Authorized personnel
Due to their specialist training, knowledge of measuring and control technology, and experience, as well
as their knowledge of country-specific regulations and the relevant standards and provisions, the technical
personnel are able to perform the work described and detect any potential dangers independently.
2.2 Intended use
The PAC50 is an electronic pressure switch for monitoring the pressure of compressed air. It must only be
used by authorized personnel and only in industrial environments. If the PAC50 is used for any other purpose
or modified in any way, any warranty claim against SICK AG shall become void. The PAC50 is only to be operat-
ed under the specific process conditions and ambient conditions specified in these operating instructions.
6 2 O p e r a t i n g I n s t r u c t i o n s | S I C K
Safety
8017612/14NK / 8/2/2019 | PAC50
Subject to change without notice
PAC50