SICK PAC50 Notice D'instruction page 61

Operating Instructions
LT Leakage Tester
Lower pressure value/threshold of
p /LTP2
leakage measurement
2
Time limit/time period of leakage
t /TOUT
measurement
out
Pressure difference calculated in the
dP
leakage measurement
Volume of the pressure system/lines
PVOL
to be measured
Timer A (time it takes for p1 to be
TimA reached after the measurement is
started)
Leakage measurement has been
DONE
completed
1.3 Symbols used
WARNING!
... indicates a specific or potential hazard. This is intended to protect you against accidents.
Read carefully and follow the warnings.
8017612/14NK / 8/2/2019 | PAC50
Subject to change without notice
Upper pressure value/threshold
p /LTP1
of leakage measurement
1
p /p System pressure/supply pressure
0 supply
Time value/duration of leakage
dT
measurement
QL Leakage rate
AMODE Analog output mode (dP or dT)
MEAS Leakage measurement is in progress
Sensor ready for the leakage
Wait User measurement to be started
(waiting for the user to trigger it)
O p e r a t i n g I n s t r u c t i o n s | S I C K
PAC50
6 1