SICK PAC50 Notice D'instruction page 81

Operating Instructions
+ 3
40 0
Figure 11: Opening in the
switch panel
8017612/14NK / 8/2/2019 | PAC50
Subject to change without notice
Installation/Mechanical connection
Insert the switch panel mounting frame into the switch panel from the outside,
•
making sure that the openings for the fixing rails are facing upward [1].
From above, push the fixing rails into the switch panel mounting frame as far
•
as possible [2].
Carefully screw in the four pre-fitted, short fixing screws for the fixing rails as
•
far as possible (max. 8 Ncm) [3].
Insert the pressure switch into the switch panel mounting frame support from
•
behind [4].
Secure the fixing element in the mounting rail support for the pressure
•
switch [5].
Carefully screw the fixing element and the fixing rails together using the two
•
long fixing screws (max. 8 Ncm) [6].
Carefully retighten all the screws (max. 8 Ncm).
•
O p e r a t i n g I n s t r u c t i o n s | S I C K
PAC50
8 1