SICK PAC50 Notice D'instruction page 99

Operating Instructions
PAC50-FGG (Leakage Tester)
After the measurement starts, the sensor switches directly to an error mode if p
greater than the upper threshold p
appears underneath the current measured value, and "p<p
(e.g., "0.60" display position E2) or "p<p
The message must be acknowledged by pressing
8017612/14NK / 8/2/2019 | PAC50
Subject to change without notice
Errors
. The display turns red. In the display, "WARN" (display position C1)
1
" and the value for p
2
in order to set the sensor back to measurement standby.
is not at least 0.02 bar
0
" (display position C2) and the value for p1
1
appear in the bottom line.
2
O p e r a t i n g I n s t r u c t i o n s | S I C K
PAC50
9 9