SICK PAC50 Notice D'instruction page 80

Operating Instructions Installation/Mechanical connection PAC50
5.2.2 Rugged mounting set for challenging applications (shock/vibration) – part 2099916
To install in a switch panel, use the switch panel mounting set for rugged applications, which is available as
an accessory (see Figure 10). The maximum switch panel thickness is 5 mm. Figure 11 shows the dimen-
sions of the cut-out section in the switch panel.
.
3
.
2
.
6
.
A 2 : 1
5
.
4
A
.
1
Figure 10: Switch panel mounting set, rugged
8 0 O p e r a t i n g I n s t r u c t i o n s | S I C K 8017612/14NK / 8/2/2019 | PAC50
Subject to change without notice