SICK PAC50 Notice D'instruction page 79

Operating Instructions
5.2 Installation with a switch panel mounting set
5.2.1 Standard mounting set – part 2069200
To install in a switch panel, use the switch panel mounting set, which is available as an accessory (see
Figure 8). The maximum switch panel thickness is 5 mm. Figure 9 shows the dimensions of the cut-out
section in the switch panel.
1
Figure 9: Switch panel mounting set
8017612/14NK / 8/2/2019 | PAC50
Subject to change without notice
Installation/Mechanical connection
2
4
3
O p e r a t i n g I n s t r u c t i o n s | S I C K
PAC50
7 9