Proper Use; Maintenance And Cleaning; Repair - Franke SMART SM 86 P Manuel D'installation Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
If the oven is to be permanently connected
to the power supply:
Z
X
Ensure that the device is installed only
by the customer service, an electrician
or trained personnel with the appropriate
knowledge/education.
Z
X
Ensure that the device is connected
directly to the mains socket. Ensure that
no adapters, no multi-sockets and no
extension cables are used to connect
the device.
Z
X
Ensure that the device is not exposed
to atmospheric agents (rain, sun).
Risk of death!
Z
X
Keep pets away from the device.
Z
X
Packaging materials, e.g. plastic film
and polystyrene, can be dangerous for
children.
Z
X
Keep packaging material away from
children.

Proper use

Z
X
Only use the device to prepare and cook
food.
Z
X
Use oven gloves when placing containers
in the oven or when taking containers out
of the oven.
Z
X
Observe the manuals of the cooking
devices that are used with the oven when
using the device.
Z
X
Do not place power cables of other electric
appliances on hot parts of the oven.
Z
X
Do not use flammable liquids near
the oven.
Risk of overheating and malfunction
of the oven due to blocked ventilation!
Z
X
Do not block the ventilation of the fan
or the cooling openings above the oven
door.
Risk of burns!
Z
X
When opening or closing the door, always
hold the door handle in the middle.
SM 86 P
Risk of electric shock due
to damaged device!
Z
X
Do not switch on a damaged device.
Z
X
Switch off the fuse in the fuse box.
Z
X
Contact the customer service.
Risk of electric shock!
Z
X
Do not touch the device with wet parts
of your body.
Z
X
Do not use the device when barefoot.
Z
X
Do not pull on the device or power cable
to unplug it from the socket.

Maintenance and cleaning

Before maintenance or cleaning:
Z
X
Disconnect the device from the power
supply, e.g., switch off the fuse
in the fuse box.
Risk of electric shock due
to entering liquid!
The device contains electrical components.
Z
X
Make sure that no liquid enters the interior
of the device.
Z
X
Do not use pressurised steam to clean
the device.
Z
X
Do not use a wet cloth to clean
the operating elements.

Repair

Z
X
Do not allow anyone except qualified
personnel to install or repair the appliance.
Z
X
Contact a service centre authorised
by the manufacturer or qualified personnel
in the following cases:
Immediately after unpacking, in the event
of doubts regarding the integrity
of the device
During installation (according
to the manufacturer's instructions)
Doubts regarding the correct operation
of the device
Malfunction or poor operation
Replacing the power socket if incompatible
with the power plug of the device
– 7 –
EN

Publicité

Table des Matières
loading

Table des Matières