Display Unit - Burkert 8326 Manuel Utilisateur

Processing Unit

2.1.3 Display Unit

The measured-value indicator has four digits (in a 7-segment display) + symbols. Be-
low it, is line 1 (16-segment display) used to display error codes and the signal's unit
of measure. The unit of measure can be selected by the operator.
Additional information is displayed in lines 2 and 3 (16-segment display). The operator
can enter commands in the programming mode on the display unit by means of menu
guided, clear-text prompts.
Transmitters with displays offer a larger number of programming and processing op-
tions. These options include alarm status, damping, signal inversion, tank lineariza-
tion and diagnostic messages.
Display units can be easily upgraded (see Section 4.2).
Subject to technical changes without notice.
Pressure Transmitter 8326
Product Description
CALIBRATION
RANGE
GB-4