Pressure Compensation When Using A Relative Pressure Sensor - Burkert 8326 Manuel Utilisateur

Terminal Configuration
Ground
L- Negative
L+ Positive
I Test circuit; connect the ampere meter between terminals L+ and I
The unit must be properly grounded in order to guarantee EMC resistance.
4.5

Pressure Compensation when using a Relative Pressure Sensor

A Goretex diaphragm is used to compensate for the atmospheric pressure under the
IP 65 Protection Method.
A special cable with capillaries for relative pressurization is used for Ingress Protec-
tion IP 67.
Subject to technical changes without notice.
Pressure Transmitter 8326
Installation
GB-14