Installation Examples - Burkert 8326 Manuel Utilisateur

2.3

Installation Examples

The 8326 is primarily used to monitor the pressure in pipes, technical equipment and
tanks. Depending on the pressure range pressures between 20 mbar up to 1000 bar
can be measured. The pressure is measured using absolute (against a vacuum) or
relative (against external or air pressure) measurement depending on the type of sen-
sor selected.
The 8326 is also used for hydrostatic pressure measurement within liquid filled pipes
and containers.
Process Pressure Measurement:
Used to measure pressure of liquids
or gases in pipelines.
Process Pressure Measurement:
Installed behind feed pumps for
process control or monitoring of pump
functions.
Subject to technical changes without notice.
Pressure Transmitter 8326
Product Description
Process Pressure Measurement:
Used to measure container pressure.
Process Pressure Measurement:
Installed in front of and behind the filter.
Uses the pressure differential for moni-
toring the function or accumulation of dirt
in the filter. Both output signals are pro-
cessed by a PLC or signal converter.
GB-6