Main Menu: Evaluation - Burkert 8326 Manuel Utilisateur

6.5.4 Main Menu: Evaluation

MAIN MENU
EVALUATION
EVALUATION
FUCTIONS
Enter height values, which are each assigned a volumetric value of measure for tank
linearization. The linearization and the assignment of the 4 ... 20 mA output signal are
converted into tank volumes using this value pair.
Please check the following if "Wrong Entry" appears in the Evaluation
menu:
• whether or not more than 32 value pairs are entered in the table for tank
linearization (please note: P 0 and P 31 are fixed at 0% and 100% re-
spectively)
• whether or not an existing height value was tried to be stored again
Please enter correct values.
Subject to technical changes without notice.
Operation of Transmitters with Displays
EVALUATION REF. POINT
REF. TABLE INSERT
REF. POINT
DELETE
TABLE
EDIT
TABLE
ACTIVATE ?
EVALUATION LINEAR
LINEAR ACTIVATE ?
DENSITY
EVALUATION
DENSITY
Pressure Transmitter 8326
The level value and volume value
always be adjusted or verified in
order to store a value pair.
INSERT INSERT
DELETE
The selected
tag (value pair)
is deleted
DELETE
DELETE
The preset
linearization table
is activated
The linear correlation
between input and
output is set
The density of
the medium is set
Entry of a new value pair
for the table used in
tank linearization
Entry of the level as a %
Entry of the associated
volume as a %
It is possible to enter up to
30 value pairs
The value pair for 0% (P0)
and 100% (P31) are fixed
The upper limit
can only be veri-
fied, not altered
Selected tag
(value pair:
level/volume)
is altered
The lower limit
can only be veri-
fied, not altered
GB-28