Signal Cable Connection; Video Cable Connection - Videotec ULISSE Manuel D'instructions

8.5 Signal cable connection

All signal cables must be grouped together
by means of a strap.
Fig. 27

8.5.1 Video cable connection

CAUTION! In order to reduce the risk of fire,
only use UL Listed or CSA certified cables
sizes greater than or equal to 0.13mm² (26
AWG).
CDS installation type (Cable Distribution
System). The installation is type TNV-1, do
not connect it to SELV circuits.
22
Connect the screen and central cable
respectively to the GND and VIDEO
terminals. The terminals accept cables with
sections between 0.5mm² (AWG 20) and
0.08mm² (AWG 28).
GND
VIDEO
Fig. 28
Standard version.
GND
VIDEO
Fig. 29 Version with LED illuminators.
MNVCUPTDMB_2104_EN