Housing Board Description; Connection Of The Camera And Motorised Lens - Videotec ULISSE Manuel D'instructions

7.2 Housing board description

BOARD DESCRIPTION
Connector/Terminal Function
CN1 BNC connector, video signal from
the camera
CN2 Motorised lens motor control
connector
CN3 Motorised lens potentiometer
connector
CN6 Serial connector for controlling
the camera
CN7 Camera power supply, dry contact
for activating the Day/Night came-
ra mode, additional lines
DIP1 Select the lens power supply
voltage
Tab. 1
CN3
CN2
CN1
DIP1
Fig. 10
MNVCUPTDMB_2104_EN
7.2.1 Connection of the camera and
motorised lens
All connections illustrated below should
be made only and exclusively by expert
installers who should comply with all the
wiring and power supply specifications for
the devices.
The electronics board is designed to control cameras
with motorised lenses (Focus, Iris, Zoom), which
may or may not have potentiometers to control the
position reached.
Before making the connections make sure that the
voltages supplied by the board fall within the limits
allowed for the apparatus.
CONNECTOR FOR CAMERA/MOTORISED LENSES
Voltage
+12V
+5V
From 6Vdc up to
15Vdc (adjustable)
Tab. 2
CN6
CN7
Current Description
800mA max Camera power
supply
15mA max Lens potentiome-
ter power supply
200mA max Lens motor power
(Focus+Zoom+Iris) supply
15