11 Accessories
For further details on configuration and
use, refer to the relative manual.
11.1 Washer
The P&T can be equipped with an external pump that
supplies water for the glass to be cleaned.
Fig. 122
58
11.1.1 Washing system connection
CAUTION! TNV-1 installation type. The
installation is type TNV-1, do not connect it
to SELV circuits.
CAUTION! In order to reduce the risk of fire,
only use UL Listed or CSA certified cables
sizes greater than or equal to 0.13mm² (26
AWG).
All signal cables must be grouped together
by means of a strap.
WASHING SYSTEM CONNECTION
Terminals
AL1-COM
AL1-AGND
O1-C1
Tab. 19
O1
AL1
COM
Fig. 123 Standard version.
O1
AL1
AGND
Fig. 124 Version with LED illuminators.
For further information refer to the relative
chapter (10.1.11.2 Washer Menu, page 57).
Description
Alarm input. The washing
systems provided with level
sensor indicate the absence
of liquid in the tank.
Clean contact to activate the
washing system.
C1
C1
MNVCUPTDMB_2104_EN