10.1.6 Housing Serial Port Menu
Once you have exited from the camera
OSM, press the Iris Close key to return to
the Pan & Tilt OSM.
To prevent the camera OSM from
overlapping the Pan & Tilt OSM, exit from
the camera configuration mode before
pressing the Iris Close key.
1.
Protocol: It allows you to choose the protocol
used in the housing serial.
2.
Baud Rate: It allows you to choose the baud
rate used in the housing serial.
3.
Return Cmd: It replaces the Confirm control
provided with the joystick with a customised
option.
Exit Cmd: It replaces the Exit control provided
4.
with the joystick with a customised option.
Enable Camera OSM: Allows access to the
5.
camera configuration mode.
HOUSING SERIAL PORT
------------------------
1>PROTOCOL
2 BAUDRATE
3 RETURN CMD: IRIS CLOSE
4 EXIT CMD
5 ENABLE CAMERA OSM
Fig. 86
MNVCUPTDMB_2104_EN
:
NONE
:
9600
:
IRIS OPEN
>
10.1.7 Polarity Menu
It allows you to configure the following parameters:
Zoom: It allows you to choose the motor
1.
rotation polarity of the lens Zoom.
2.
Focus: It allows you to select the motor rotation
polarity of the lens Focus.
3.
Iris: It allows you to select the motor rotation
polarity of the lens Iris.
POLARITY
------------------------
1>ZOOM :
2 FOCUS:
3 IRIS :
Fig. 87
POSITIVE
POSITIVE
POSITIVE
43