How To Create A New Mask - Videotec ULISSE Manuel D'instructions

10.1.8.4 How to create a new mask

Choose a disabled mask by selecting Mask Number
from the Edit Masks menu. Select Edit Mask to edit it (
Fig. 92, page 45).
In the following example we shall mask a flower.
• Press the Iris Close button to pass from Masking
mode to Move Camera mode.
MASK 1
Edit Mask: ON
Iris Close→ PTZ enabled
Fig. 93
• Operate the joystick on the keyboard to move the
unit and if necessary operate the zoom to centre
the flower on the screen.
MASK 1
PTZ Motions Enabled
Iris Open → Return
Fig. 94
46
• When the desired result is obtained press the Iris
Open.
MASK 1
PTZ Motions Enabled
Iris Open → Return
Fig. 95
• A small rectangle will appear. Operate the joystick
(Pan & Tilt) to enlarge the rectangle until it covers
the whole flower.
MASK 1
Edit Mask: ON
Iris Close→ PTZ enabled
Fig. 96
• When the desired result is obtained confirm by
turning the zoom to tele.
MNVCUPTDMB_2104_EN