Sun SWB 340 Notice D'utilisation page 84

Table des Matières

Publicité

26
26
84
5-36
5-37
5-38
5-39
5-40
Operation
Figure 5-36 OPTIMISATION "OP.2"
START is signalled on the screen.
— Perform a measuring run.
A compensation run is performed.
The OPTIMISATION "OP.3" screen is displayed (Fig.
5-37).
Figure 5-37 OPTIMISATION "OP.3"
Mount the tyre correctly on the rim (follow the
centring line) and inflate to specified inflation
pressure.
Confi rm by pressing menu key 26.
The OPTIMISATION "OP.4" screen is displayed (Fig.
5-38).
Figure 5-38 OPTIMISATION "OP.4"
(fi rst measuring run with tyre)
— Clamp the wheel on the balancer.
— Position the valve so that it is exactly perpendicular
to and above the chuck.
— Confi rm the valve position by pressing menu key
26.
The OPTIMISATION "OP.5" screen is displayed (Fig.
5-39).
Figure 5-39 OPTIMISATION "OP.5"
START is signalled on the screen.
— Perform a measuring run.
A measuring run is performed.
The OPTIMISATION "OP.6" screen is displayed (Fig.
5-40).

Publicité

Table des Matières
loading

Table des Matières