1
1
1
1
20
4-9
2
4-10
2
4-11
4-12
Layout
Fig. 4-9
SETTING
Settings Screen.
You may access it with the Key (1)
Even though the machine presents the most common
functions already selected, the operator can customise
various display specifi cations and process modes. This
screen lets the operator customise all the operating
settings to his/her specifi c requirements.
Once saved the balancer will present the settings at
each start-up.
Fig. 4-10
COUNTERS
Counters Screen.
You may access it with the Keys (1 and 2)
The information is primarily useful for
statistical purposes, for example to obtain evidence of
load intervals of parts when defective, or of monthly
(yearly) use of the machine, etc.
Fig. 4-11
Wi-Fi
Wi-Fi settings screen.
You may access the available networks screen page
with the keys (1 and 2). In this screen the operator can
associate, connect or disconnect the machine to the
list of networks displayed.
MACHINE NAME ON THE NETWORK
The name of the machine to be connected to the
network via Wi-Fi can contain numbers and letters of
the English alphabet, as well as the special characters
listed below;
! ? * : ; < > $ % / ( ) [ ] , - + _
All the remaining special characters are not allowed.
The network connection will not work if they are used
in the machine name.
Fig. 4-12
OP.1
Optimisation / weight Minimisation screen page.
You may access it with the Key (1) when on the Screen
after a measuring run.