Sun SWB 340 Notice D'utilisation page 26

1c
2c
3c
4c
A
5c
6c
7c
8c
26
B
4-15c
Layout
1c EASY ALU TOGGLE key
– With the "Easy Alu Toggle" key you can change the
Alu mode proposed by the
2c HOME Key
– Returns to the home page INTRO SCREEN.
3c OPT/MIN Key
– Starts the Optimisation / Minimisation program.
4c SPLIT Key
– Starts the procedure for splitting the wheel weight,
to be applied behind the spokes.
5c SPOKES key
– Each press increases the number of spokes set by
one (from 3 to 15 spokes).
6c PROFILES MANAGEMENT Key
– Recalls the data from the pre-fi lled in list.
7c COMPENSATION key
– Retrieves the Compensation Run.
8c USER CALIBRATION key
– Starts User Calibration.
machine.