Sun SWB 340 Notice D'utilisation page 90

26
29
26
26
90
5-46b
5-47
5-48
5-49
5-50
Operation
Figure 5-46b OPTIMISATION "OP.10", outside
— Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the tyre
outer side exactly perpendicular to and above the
chuck.
— Confi rm by pressing menu key 26.
The OPTIMISATION "OP.11" screen is displayed (Fig.
5-48).
Figure 5-47 OPTIMISATION "OP.10", inside
If the tyre cannot be turned over on the rim (e.g.:
Asymmetrical and Directional),
— press the menu key 29, then
continue as shown on screen OPTIMISATION
—
"OP.10" (Fig. 5-46b).
If the wheel can be turned over on the rim;
— Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the inside
of the tyre, exactly perpendicular to and above the
chuck.
— Turn the tyre over on the rim (tyre changer).
— Confi rm by pressing menu key 26.
The OPTIMISATION "OP.11" screen is displayed (Fig.
5-48).
Figure 5-48 OPTIMISATION "OP.11"
— Readjust the tyre on the rim until the double mark
coincides with the valve (use tyre changer).
— Confi rm by pressing menu key 26.
The OPTIMISATION "OP.12" screen is displayed (Fig.
5-49).