Sun SWB 340 Notice D'utilisation page 98

26
29
98
5-60
5-61
5-62
5-63
5-64
Operation
Fig. 5-60 MINIMISATION "Un.10", outside
— Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the tyre
outer side exactly perpendicular to and above the
chuck.
— Confi rm by pressing menu key 26.
The MINIMISATION "Un.11" is displayed (Fig. 5-62).
Figure 5-61 MINIMISATION "Un.10", inside
If the tyre cannot be turned over on the rim (e.g.:
Asymmetrical and Directional),
— press the menu key 29, then
— Continue as shown on screen
MINIMISATION "Un.10" (Fig. 5-60).
If the wheel can be turned over on the rim;
— Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the tyre,
on the inner side of the wheel, precisely above the
chuck.
— Turn the tyre over on the rim (tyre changer).
— Confi rm by pressing menu key 26.
The MINIMISATION "Un.11" is displayed (Fig. 5-62).
Figure 5-62 MINIMISATION "Un.11"
— Readjust the tyre on the rim until the double mark
coincides with the valve (use tyre changer).
— Confi rm by pressing menu key 26.
The MINIMISATION "Un.12" is displayed (Fig. 5-63).