Sun SWB 340 Notice D'utilisation page 96

26
26
26
96
5-55
5-56
5-57
5-58
5-59
Operation
Figure 5-55 MINIMISATION
— Rotate the wheel into marking position following the
arrows.
— In this position mark the tyre, on the outer side of
the wheel, precisely above the chuck.
— Confi rm by pressing the key 26.
The MINIMISATION "Un.7" screen is displayed (Fig.
5-56).
Figure 5-56 MINIMISATION "Un.7"
— On the tyre changer, turn the tyre with respect to
the rim until the valve is aligned with the mark made
on the tyre.
— Confi rm by pressing the key 26.
The MINIMISATION "Un.8" is displayed (Fig. 5-57).
Fig. 5-57 MINIMISATION "Un8"
— Clamp the wheel on the balancer.
— Rotate the wheel until the valve is exactly
perpendicular to and above the chuck.
— Confi rm the valve position by pressing the key 26.
The MINIMISATION "Un.9" is displayed (Fig. 5-58).
Figure 5-58 MINIMISATION "Un.9"
START is signalled on the screen.
— Perform a measuring run.
A measuring run is performed.
The MINIMISATION screen "Un.10" is displayed,
outside (Fig. 5-59) or the MINIMISATION "Un.10"
appears, inside (Fig. 5-61).
With indication H0
Optimum condition has been achieved and cannot be
improved.
— Continue as shown on screen BALANCING (Fig.
5-51).
"Un.6"