Angelo Po FX61 G3 Manuel D'installation Et Mode D'emploi page 253

KEY TO ALARM TABLE (Continued
Alarm Fault
E10
compartment has
overheated
E11
E13 diagnostics tripped
E14
E20 Setup error
E23 The washing cycle has
been interrupted during
stage
E26
system failure
E28
open
Remedy
The oven solves the problem on its own
Call an authorized service agent
Call an authorized service agent
Press the reset button and rinse the cooking
chamber thoroughly by hand.
Operate the oven in convection mode to dry
the cooking chamber.
Check that no residues of cleaning products
have been left inside the cooking chamber.
Rinse the cooking chamber by hand.
Press the "Reset" button
Combination Oven Installation and Operation Manual
Section 8
Troubleshooting
Notes
The oven's functions are
enabled; cooking cycles
can be performed
The oven's functions are
enabled; cooking cycles
can be performed
The oven's functions
are disabled; no cooking
cycles can be performed
call an authorized service
agent
call an authorized service
agent
The oven's functions
are enabled so cooking
cycles can be performed
Call an authorized
service agent
49