Angelo Po FX61 G3 Manuel D'installation Et Mode D'emploi page 249

C ANGING T E IGNITION PLUG
WARNING Before perfor
that involves electrical
disconnection and/or exposure to electrical
co ponents al ays follo
LOCKOUT/TAGOUT Procedure. Disconnect
all circuits. Failure to co ply can cause
property da age in ury or death.
WARNING Disconnect the po er supply
efore changing ignition plug.
2. Open the tangs (B) and remove the guard (C).
(D) to remove the ignition plug
unit (E).
4. Replace the guard and close the tangs when
done.
A
C
ing any service
connection
the Electrical
(A).
B
D
E
D
DECOMMISSIONING T E APPLIANCE
WARNING Before perfor
or
that involves
disconnection and/or exposure to electrical
co ponents al ays follo
LOCKOUT/TAGOUT Procedure. Disconnect
all circuits. Failure to co ply can cause
property da age in ury or death.
of procedures must be carried out to ensure the
appliance and its components are no longer an
obstacle and are not easily accessible.
To ensure the appliance does not present a hazard
Place the appliance in a suitable area which is not
easily accessible with barriers to prevent anyone
from accessing it.
type and dispose of them separately in accordance
with the relevant local recycling requirements and
regulations.
IMPORTANT _________________________
Do not
products lu ricating
etallic co ponents
resins etc. in the environ ent. Dispose
of the in co pliance
la s regulations
require ents.
Combination Oven Installation and Operation Manual
Parts Replacement
ing any service
electrical connection
the Electrical
du p non iodegrada le
oils
ru
ith all relevant
and local
Section 7
or
and non
er PVC
recycling
45