Angelo Po FX61 G3 Manuel D'installation Et Mode D'emploi page 236

Section 5
Operation
regeneration programs.
Press the button to show the program of
choice on display (7).
Press button (16) to start the selected program.
Once the program has been started, only keys
the values set for the current stage.
to modify the cooking mode.
Note: Changes made in this way only remain
active for the current cooking process; to save
them permanently, press the cooking mode
IMPORTANT _________________________
To return to the original settings
appliance in STOP
green light press and hold utton 12 longer
than 3 seconds as the entire panel po ers
do n then press and hold utton 18 for at
least 3 seconds.
19. Quick cooling button: cools the cooking
chamber quickly with the door closed.
Press the button and display (7) will show
the message "100°C" and display (8) will
show the message "CLd".
Press button (4) and turn knob (21) to set
the required cooling temperature.
Press button (16) to start the program.
a buzzer sounds.
cooking.
With the appliance in STOP mode (icon (16) is lit
Press button (19) and turn knob (21)
to set the cooldown.
Press again button (19) to save the selected
function.
IMPORTANT _________________________
Do not use this function
progress.
32 Combination Oven Installation and Operation Manual
can be used
ith the
ode icon 16 is lit
(12) longer
hile cooking is in
7
4
5
6
12
13
16
17
ith a
18
21
button (19)
20. The "delay start" button: is used to start
delayed cooking.
Press button (20) and the display (8) will show
the max. delay start time (1 hours
Press button (5) and and turn knob (21) to set
the desired value.
Press knob to store the value and then press the
(16) button to begin the delayed start.
press button (16)
1 2 3
22
Press the
8
9
10
11
15
14
20
19