Angelo Po FX61 G3 Manuel D'installation Et Mode D'emploi page 233

10. "Product core
temperature setting button:
the product measured by the core probe
knob (21).
during cooking: press once to show the
temperature value on display (8).
Press the button and turn knob (21) to
modify the value set.
11. Burner icon:
12. Reset button: resets alarms (beepers and
13. "ECO" button: used to activate or deactivate
the energy saving function (to be used for
14. Fan speed button: used to set three speeds of
the fan wheel.
max continuos speed: when icon switched
Off.
intermittent speed: press once the button
(9)
min continuous speed: press twice the
button and the icon switches On.
15. Optional probe icon: when switched "ON"
indicates the vacuum probe has been inserted.
This function excludes the use of the main probe
at the core of the oven".
temperature using knob (21).
In "Convection cooking" mode you can adjust
the percentage of opening of the vent, which
is shown on the display (9) ("0" = vent always
open; "100" = vent always closed).
selected program cycle shown on the display
probe" or "vacuum"
(10) to set the vacuum probe
Starts or ends the
1
7
4
5
6
12
13
16
17
18
21
17. Steam injection button: increases humidity.
into the oven during any cooking phase.
18. "Recall" program button:
regeneration programs.
show the message "P01".
show the message "P02".
will show the message "P03".
Combination Oven Installation and Operation Manual
Section 5
Operation
2 3
8
9
10
11
15
14
20
19
22
(7) will
(7) will
(7)
29