Maintenance; Maintenance Recommendations - Angelo Po FX61 G3 Manuel D'installation Et Mode D'emploi

MAINTENANCE RECOMMENDATIONS

performing the scheduled maintenance procedures
recommended by
longer working life and constant maintenance of
safety requirements.
WARNING
unexpected health and safety hazards if
turned on.
WARNING
that involves electrical
disconnection and/or exposure to electrical
LOCKOUT/TAGOUT Procedure. Disconnect
At the end of each session of use and whenever
necessary, clean:
obstructed
the appliance and clean it if it is dirty or
Every year
perform the following operations:
clean if necessary
exchanger and replace if necessary.
replace if necessary and that the power supply
cable is intact
inspection window and combustion air fan

MAINTENANCE

the manufacturer.
connection
dioxide (CO
Proper
IMPORTANT _________________________
Record the yearly inspections.
IMPORTANT _________________________
representative or an authorized service
ELECTRICAL LOCKOUT/TAGOUT
PROCEDURE
or
WARNING
that involves
disconnection and/or exposure to electrical
LOCKOUT/TAGOUT Procedure. Disconnect
used to protect personnel working on an electrical
appliance. Before performing any maintenance
or service that requires exposure to electrical
into OFF position.
2. Place a lock or other device on electrical box
cover to prevent someone from placing circuit
breaker ON.
3. Place a tag on electrical box cover to indicate
that appliance has been disconnected for
service and power should not be restored until
tag is removed by maintenance personnel.
4. Disconnect appliance power cord from electrical
outlet.
5. Place a tag on the cord to indicate that unit
has been disconnected for service and power
should not be restored until tag is removed by
maintenance personnel.
Combination Oven Installation and Operation Manual
Section 6
Maintenance
2
electrical connection or
75