Selecting An Existing Patient - Boston Scientific Vercise DBS Mode D'emploi

Vercise™ DBS Programming Manual

Selecting an Existing Patient

The Clinician Programmer will automatically recognize a patient if you have previously link the
Clinician Programmer to the patient's hardware.
To select an existing patient:
1 Click the down arrow on the right side of the Patient pull-down menu.
2 Select an appropriate patient from the alphabetized list.
3 Click the down arrow on the right side of the Reason for Visit pull-down menu.
4 Select the reason for the patient visit.
The patient session has now begun. You may now proceed to other screens by clicking the
appropriate buttons on the screen.
Vercise™ DBS Programming Manual
91053785-07 12 of 323