Turning Stimulation On And Off For Individual Areas - Boston Scientific Vercise DBS Mode D'emploi

Turning Stimulation On and Off for Individual Areas

To turn ON stimulation for an Area:
1 Make sure the Area you wish to turn on is selected.
To select an Area, see Selecting an Area on page 22.
Note: To initially turn on stimulation for an area, that area must first be configured with at
least one cathode.
2
Click the
To turn OFF stimulation for an Area:
1
Make sure the Area you wish to turn off is selected.
To select an Area, see Selecting an Area on page 22.
2 Click the
button of the selected area to turn stimulation ON.
button of the selected Area to turn stimulation OFF.
Programming the Patient
Vercise™ DBS Programming Manual
91053785-07 25 of 323