Globally Turning Stimulation Off And On - Boston Scientific Vercise DBS Mode D'emploi

Vercise™ DBS Programming Manual

Globally Turning Stimulation Off and On

The Stimulation Power button will stop and start stimulation for those Areas that are active (turned
on). The Stimulation Power button will only apply to active Areas.
To turn stimulation OFF for all active Areas:
1 Click the red
stop for those Areas that are turned on.
To turn stimulation ON for all previously active Areas:
1
Click the green
ramp up to the stored amplitude levels for the active program settings.
Stimulation will turn on for those Areas that were last turned off by clicking the "STOP"
button.
Vercise™ DBS Programming Manual
91053785-07 36 of 323
button in the lower left-hand corner of any screen. Stimulation will
button in the lower left-hand corner of any screen. Stimulation will