Generic Report - Boston Scientific Vercise DBS Mode D'emploi

Generic Report

Generic Report provides different reporting options for one patient based on data acquired within a
specified range of dates. To create a Generic Report:
1
Click
2 Click the
3
Select the type of report to generate by clicking on the corresponding button. Choose from:
● Programs: all programs created with the CP, including date/time it was saved, slot
number, graphical display of electrode configuration, stimulation parameters, and
options for each program
● Threshold Measurements: not applicable
● Impedances: history of all impedance measurements made with the CP
● Battery Charge Profile: history of battery charge, in Volts, measured at 4 hour
intervals
● Stimulation Use Profile: history of program usage
● Patient History: date, reason, and notes for each visit
4
Select a patient from the Patient drop-down list on the right side of the screen.
5
Limit the results in the report by selecting two dates from the drop-down menus, such that
only information on the selected patient collected during visits that occurred between these
two dates will be included in the report.
6
Select the order the information will be displayed.
Check the box next under the Order option to display the information in an ascending order
(by date). Uncheck the box to display the information in descending order (by date).
7
Click
8
To export the report as an electronic file, click
9 To print the report, click
10 Click
on the toolbar of any screen.
button.
to create the report.
.
to exit from the report.
Creating Reports
.
Vercise™ DBS Programming Manual
91053785-07 53 of 323