Swapping The Leads - Boston Scientific Vercise DBS Mode D'emploi

Vercise™ DBS Programming Manual

Swapping the Leads

By default, Bionic Navigator assigns contacts 1-8 (1-L port) to the Lead that appears on the left and
contacts 9-16 (2-R port) to the Lead that appears on the right.
To aid in programming the Stimulator, you may wish to rearrange the display so that the Lead
connected to port 1-L (contacts 1-8) appears on the right, and the Lead connected to port 2-R
(contacts 9-16) appears on the left.
Note: This function only visually changes the order of the Leads on the Configuration
and Programming screens. It does not change the order of the Leads displayed in
reports or programs, which list contacts 1-8 followed by contacts 9-16.
To rearrange the display of the Lead(s) (left to right):
1
Click
2
Click to change the connection of the Leads to the Stimulator ports.
3
Click to save your changes or
Vercise™ DBS Programming Manual
91053785-07 18 of 323
from the Configuration screen.
to exit without saving your changes.