Measuring Field Potentials - Boston Scientific Vercise DBS Mode D'emploi

Measuring Field Potentials

The EGL Scan™ function in DBS mode measures field potentials using an impedance-like
measurement. These measurements may be taken for data analysis purposes and stored in
the system, but they will not appear on the screen. If you wish to view this data, contact Boston
Scientific.
To measure field potentials with EGL Scan:
1
Click from the toolbar on any screen.
2 Select EGL Scan from the drop-down menu. A message will appear to indicate when
measurements are complete.
3
Click to exit.
Using Additional Tools
Vercise™ DBS Programming Manual
91053785-07 63 of 323