Re-Lubrication Of Motor Bearings; Disposal - Biral HP-E Instructions D'installation Et D'entretien

english
Sound pressure level
Motor Speed
on rating plate
[kW] [ /min]
1
0,75 2800 – 3000
3400 – 3600
1,1 2800 – 3000
3400 – 3600
1,5 2800 – 3000
3400 – 3600
2,2 2800 – 3000
3400 – 3600
3,0 2800 – 3000
3400 – 3600
4,0 2800 – 3000
3400 – 3600
5,5 2800 – 3000
3400 – 3600
7,5 2800 – 3000
3400 – 3600
11 2800 – 3000
15 2800 – 3000
18,5 2800 – 3000
22 2800 – 3000
52

13. Re-lubrication of motor bearings

For motors >11 kW:
Sound pressure
The motor bearings are of the open type and must be
level
relubricated regularly.
[dB(A)]
The motor bearings are pre-lubricated on delivery.
The built-in bearing monitoring function will give a
< 70
warning indication on the R100 when the motor bearings
< 70
are due to be relubricated.
< 70
< 70
65
70
When lubricating for the first time, use twice the amount
of lubricating grease as the lubricating channel is still
65
empty.
70
65
70
Frame size
70
MGE 160
75
MGE 180
75
The recommended grease type is Asonic GHY 72,
which is a polycarbamide-based lubricating grease.
80
76
80

14. Disposal

This product and its parts must be disposed of in accor-
69
dance with environmental protection regulations.
1. The local public or private disposal companies should
70
2. If there is no organization of this kind or it is refused
70
73
Before re-lubrication, the bottom plug
Note:
in the motor flange and the plug in the
bearing cover must be removed to ensure
that old and excess grease can run out.
Quantity
of lubricating grease
[ml]
Drive end
(DE)
13
15
be consulted in this regard.
to accept the materials used in the product, the
product or any environmentally hazardous materials
can be taken to the nearest Biral company or work-
shop.
This product contains the following
Caution:
parts/materials for which special care
is required: electronic components
with PCB (in capacitors).
Non-drive end
(NDE)
13
15