Safety Information; General Remarks; Identifi Cation Of Notices; Staff Qualifi Cation And Training - Biral Birox 80 Notice De Montage Et D'utilisation

1. Safety information

1.1

General remarks

These installation and operating instructions contain items of information of fundamental impor-
tance which must be taken into account during assembly, operation and maintenance.
They should therefore be read without fail before installation and commissioning by the fi tter and
also the responsible specialist staff/operator. They must always be available for consultation at
the plant's place of deployment.
Not only are the general safety hints included in this «Safety Hints» section to be observed, but
also the special items of safety information included in the other sections.
1.2 Identifi cation of notices
The safety information contained in these installation and operating instructions,
non-compliance with which can lead to danger for people.
This symbol is a warning of dangerous electric voltage.
You will fi nd this symbol in the case of safety information non-compliance with
which can endanger the machine and its functions.
Information signs mounted directly on the plant, such as, for example
– arrow indicating direction of rotation
– symbols for fl uid connections
must be obeyed without fail and be kept in a fully legible state..
1.3 Staff qualifi cation and training
The staff deployed for assembly, operating, maintenance and inspection tasks must show that
they have the appropriate qualifi cations for such work. The fi eld of responsibility, competence
and supervision of the staff must be stipulated exactly by the operator.
1.4

Risks in the event of non-compliance with the safety information

Non-compliance with the safety information can result in both danger for persons and also for
the plant and the environment. Non-compliance with the safety information can lead to the loss
of claims for damages of any kind.
In detail, non-compliance, for example, may result in the following risks:
– failure of important functions in the plant
– failure of prescribed methods for servicing and maintenance
– danger to persons through electrical and mechanical causes
1.5

Safety-conscious work

The safety information contained in these installation and operating instructions, the existing
national regulations for the prevention of accidents, as well as any internal working,
operating and safety regulations stipulated by the operator must be observed.
english | 31