• press the
key
• use the
• Press the
key.
15.1. SET UP - SELECTING THE TYPE OF
VEHICLE (CAR/MOTORCYCLE)
Configuration used for enabling motorcycle wheel balancing functions.
Proceed as follows to recall this programme:
- Press the
key.
- use the
- press the
key to confirm
- use the
- press the
key to change the setting:
CAr on to activate the car working environment
CAr on to activate the motorcycle working environment
- press the
key to confirm and exit.
Warning
Proceed as follows to balance a motorcycle
wheel:
- remove the hub;
- fit the motorcycle wheel adapter A on the
wheel balancer as shown in Fig. 26;
- insert the two screws that are supplied in the
holes on the wheel contact flange;
- tighten the screws on the adapter making
sure that it rests on the flange correctly;
Operator's Manual EM 9350 - EM 9350 C XLine
keys to search for SEt UP
keys to search for SEt UP
keys to search for CAr on (or CAr oFF if previously set)
UK
26
125