Automatic Position Research (Rpa); Set Up - Warning Opt - Corghi EM 9350 XLine Manuel D'utilisation

15.4. AUTOMATIC POSITION RESEARCH
When the automatic position search program is activated, at the end of each balancing
throw the machine locks the wheel into the position of the weight of the outer side; if
this is null, the wheel is locked in the application position of the inner side.
To search the position of the second side, press the raised guard button.
To disable the automatic location search program, proceed as follows:
- Press the
- use the
- press the
- use the
- press the
- rPA on to enable the Automatic Position Search program
- rPA oFF to disable the Automatic Position Search program
- press the

15.5. SET UP - WARNING OPT

The machine indicates the need to perform an unbalance optimisation procedure (OPT)
with the flashing LED on the display panel.
Proceed as follows to disable this function:
- Press the
- use the
- press the
- use the
128
(RPA)
key.
keys to search for SEt UP
key to confirm
keys to search the rPA on (rPA oFF if previously set)
key to change the setting:
key to confirm and exit.
key.
keys to search for SEt UP
key to confirm
keys to search for OPt on (OPt oFF if disabled)
Operator's Manual EM 9350 - EM 9350 C XLine