Corghi EM 9350 XLine Manuel D'utilisation page 109

- measure the width of the rim using the calliper provided (Fig. 17)
- modify the width value (-b-) displayed by pressing the
desired value is set.
The displayed values can be increased or decreased quickly by keeping the keys
pressed.
The width can be set in millimetres by changing the setting of the unit of measurement
in the machine's set-up menu
- press the key to confirm the previous value and set the machine for diameter
entry (-d-)
- read the rated rim diameter value on the tyre
- modify the displayed diameter value by pressing the
read number is set
- press the key to confirm the previous value and set the machine for distance
data entry (-A-)
- bring the distance measuring arm into contact with the inner side of the rim (fig.16).
- read the value of the distance between the wheel and the casing on the rule (A, fig.18).
- modify the displayed distance value by pressing the
read number is set
- on completion, press
Operator's Manual EM 9350 - EM 9350 C XLine
to display the unbalance values recalculated on the basis
keys until the
keys until the
18
keys until the
UK
109