Ave = Display Averaging Rate; Fil = Adc Filter Rate; Bod = Baud Rate Selection - Adam Equipment AELP Notice Utilisation

AVE = DISPLAY AVERAGING RATE

6.2
• It selects the required averaging for the display update.
• Press the [Func] key until AVE is displayed.
• Press [Print] to select the desired value.
• Press the [Func] key to return to weighing.
AVE 1 =
AVE 5 =
• Press the [Func] key to return to weighing.

FIL = ADC FILTER RATE

6.3
• It selects the required filter rate.
• Press the [Func] key until FIL is displayed.
• Press [Print] to select the desired value.
• Press the [Func] key to return to weighing.
FIL 1 =
FIL 4 =
• Press the [Func] key to return to weighing.

bod = BAUD RATE SELECTION

6.4
• It selects the required baud rate for the RS-232 communications.
• Press the [Func] key until "bod" is displayed.
• Press [Print] to select the desired value.
bod 1
bod 2
bod 3
bod 4
bod 5
bod 6
• Press the [Func] key to return to weighing.
© Adam Equipment Company 2005
Fastest display rate for uses such as filling.
Slowest display rate for uses such as animal weighing
or poor environment.
Fastest rate for speed.
Slowest rate for poor environment.
= 300 Baud
= 600 Baud
= 1200 Baud
= 2400 Baud
= 4800 Baud (default)
= 9600 Baud
9